ORSIL Heat Resistant Liquid Paints
ORSIL GEYSER BLACK
As the name indicates this is a unique product specially designed for inner pots of Geyser / Water Heaters preventing the base metal from corrosion and hot water.
- Application: Air assisted Spray Gun.
- Curing: 200°C for 20 minutes. / 180°C for 30 minutes.
- Film Thickness: 35+-5 microns.
- Theoretical Coverage:9.7 Sq M / Kg / Coat with 100% transfer efficiency
- Practical Coverage:Allow appropriate loss factor.
ORSIL GREY MM
Developed for two coat system for various applications like Generator and Automobile Silencers, etc. where high temperature are prevailing up to 600°C.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes
- Film Thickness: 25+-5 microns.
- Theoretical Coverage: 10.4 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL INTERNAL GREY
Developed coating formulation for internal areas of silencers with good corrosion resistance after achieving high temperature stress.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 35+-5 microns.
- Theoretical Coverage: 9.1 Sq M / Kg / Coat with 100% transfer efficiency
- Practical Coverage:Allow appropriate loss factor.
ORSIL 35 HR PRIMER
It is a unique primer based on a special grade of silicon epoxy binder to be applied with heat resistant top coat for the protection of silencers, mufflers, exhaust, and chimneys at temperatures up to 600°C. Specially developed for high corrosion resistance under high-temperature stress.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 25+_ 5 microns.
- Theoretical Coverage: 10.8 Sq M / Kg / Coat with 100% transfer efficiency
- Practical Coverage:Allow appropriate loss factor.
ORSIL 45 HR PRIMER
Developed for two coat system for various applications like Generator and Automobile Silencers, etc. where high temperature are prevailing up to 600°C.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 25+_ 5 microns.
- Theoretical Coverage: 10.8 Sq M / Kg / Coat with 100% transfer efficiency
- Practical Coverage:Allow appropriate loss factor.
ORSIL 30 HR SILVER
High heat resistant lustrous aluminum paint developed for applications like 2-Wheeler & Automobile Silencers, Generators, etc. Suitable for external application with good corrosion resistance after achieving high temperature stress.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 35+_ 5 microns.
- Theoretical Coverage: 7.6 Sq M / Kg / Coat with 100% transfer efficiency
- Practical Coverage:Allow appropriate loss factor.
ORSIL 45 HR SILVER
High heat-resistant lustrous aluminum paint developed for applications like 2-Wheeler & Automobile Silencers, Generators, etc. Suitable for external application with good corrosion resistance after achieving high-temperature stress.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 30+_ 5 microns.
- Theoretical Coverage: 10.66 Sq M / Kg / Coat with 100% transfer efficiency
- Practical Coverage:Allow appropriate loss factor.
ORSIL AIR DRY HR BLACK/GREY
This is a unique product specially designed to withstand heat resistance up to 500 – 550°C, since it is an air-dry product, it saves energy costs required for ovens in baking-type products.
- Application: Air assisted Spray Gun.
- Curing: Air dry for 72 hrs (Final curing and HR properties will be achieved only after achieving actual service temperature).
- Film Thickness: 25+_5 Microns
- Theoretical Coverage: 12 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL HR AIR DRY SILVER
Unique lustrous silver air dry coating specially designed to withstand heat resistance up to 500 – 550°C, since it is air dry product, it saves energy cost required for oven in baking type products.
- Application: Air assisted Spray Gun.
- Curing: Air dry for 72 hrs (Final curing and HR properties will be achieved only after achieving actual service temperature).
- Film Thickness: 25+_5 Microns
- Theoretical Coverage: 14.4 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL FIRE BLACK
It is a fire resistant ready to use single component coat which is meant for fire pits (bon fire) though this product is designed for fire pits it can be applied on fire bricks used in fire places.
- Application: Air assisted Spray Gun.
- Curing: 180°C for 30 minutes.
- Film Thickness: 16+2 Microns
- Theoretical Coverage: 27.5 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL FLAMEBLACK GLOSSY
Flame resistant single component coating which is meant for LPG gas burner grid. It is designed for LPG gas burner grid, it can be applied on various objects which are in close contact with LPG gas flames.
- Application: Air assisted Spray Gun.
- Curing: 180 / 200°C for 30 minutes.
- Film Thickness: 16+_2 Microns
- Theoretical Coverage: 29.38 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL FLAMEBLACK
Flame resistant single component coating which is meant for LPG gas burner grid. It is designed for LPG gas burner grid, it can be applied on various objects which are in close contact with LPG gas flames.
- Application: Air assisted Spray Gun.
- Curing: 200°C for 30 minutes.
- Film Thickness: 16+_2 Microns
- Theoretical Coverage: 27.5 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL HR SINGLE COAT BLACK MATTE
Ready to use coating developed for various applications such as Generator & Automobile Silencers, etc. where high temperature requirements are prevailing up to 600°C. It is easy for application and suitable for external application with good corrosion resistance after achieving high temperature stress.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 35+_5 Microns
- Theoretical Coverage: 8.28 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
ORSIL HR SCB (G)
Developed for various applications such as Generator & Automobile Silencers,etc. where high temperature requirements are prevailing up to 600°C. It is easy for application and suitable for external application with good corrosion resistance after achieving high temperature.
- Application: Air assisted Spray Gun.
- Curing: 220°C for 20 minutes / 200°C for 30 minutes.
- Film Thickness: 35+_5 Microns
- Theoretical Coverage: 8 Sq M / Kg / Coat with 100% transfer efficiency.
- Practical Coverage:Allow appropriate loss factor.
WHY CHOOSE US
Research and Development
Our research is a continuous on-going process to offer the best solutions to our important clientele. Out marketing team is always in contact with our customer to gather their requirements. They also study the application processes and their requirements. Our R & D works on these demands and finds the best and the most economical solution keeping a green environment in mind. Our R&D team lead by the top most authority in the organization, keeps abreast with the new global technologies. Orbit always endeavors to bring in new technologies.
Subscribe Now
About Us
Since 1987, ORBIT COATINGS is a leading Powder Coating & Heat Resistant Paint Manufacturing Company in India, backed with fully equipped state-of-the-art plant and high performance imported machineries. ORBIT has set its mission to be -Total solutions in Powder Coatings. Read More!